OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0706

Transmission Range Sensor A Circuit Range/Performance

The transmission range sensor (selector or multifunction switch, PRNDL) reports the selected range; it may be a multi-contact switch with a bit pattern per position, an analog sensor with two opposing voltages adding up to 5 V, or a contactless PWM sensor. Its second channel has its own codes (P2801–P2805). P0706 means the signal is present but implausible. Ford uses it per transmission: for its PWM sensor when the frequency leaves 100–175 Hz (nominal 125 Hz), for the 6F digital sensor when it stays in the transition zone between two positions. Saab's 9-5 (9650), whose sensor sits in the transmission module, flags a sum of the two opposing channels more than 0.29 V away from 5 V, with the lamp in the first trip; adaptations are frozen, the gearbox holds 2nd gear in D and the engine may not restart after switch-off.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 06

Possible causes

  • Range sensor or transmission module with integrated sensor faulty high
  • Selector cable or sensor misadjusted (position between two ranges) medium
  • Contact resistance in sensor supply or ground medium
  • Moisture or oil in harness or connector low

Symptoms

  • Check engine and/or transmission warning lamp
  • Transmission limp mode, fixed gear, harsh shifts
  • Starting problems in P/N or start interlock
  • Wrong gear indication, reversing light not working

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0706

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication