P0704
Clutch Switch Input Circuit
Only on cars with a clutch pedal: the clutch switch tells the engine module that the clutch is depressed, used to cancel cruise control, smooth load changes when shifting and for stop-start. The check is a plausibility test over driving events rather than a voltage check: Saab's Trionic T8 expects a change of state every time the car pulls away from 3 to 50 km/h (four misses in a row), the EDC16 diesel at gear changes (25 in a row, above 35 km/h and 1500 rpm), and Ford compares its two clutch switches continuously. None of them lights the check engine light; cruise control is disabled. Separate clutch pedal switch codes are P0830–P0835.
Possible causes
- Clutch switch faulty or misadjusted (does not switch or too late) high
- Connector or wiring at the pedal box damaged or corroded medium
- Floor mat or pedal stop shifted, switch bracket broken medium
- Driving style (pulling away or shifting without fully depressing the clutch) low
Symptoms
- Cruise control not working or not cancelling when declutching
- Jerks or rev hang when shifting
- Stop-start inactive
- Usually no check engine light
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0704
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- saabwisonline.com/9-3-9440/2006/dtcs/t8/p0704-00
- saabwisonline.com/9-5-9600/2006/2-engine/engine-management-system-edc-16/fault-diagnosis-diagnostic-trouble-codes/p0704