P0702
Transmission Control System Electrical
P0702 reports an electrical fault in the transmission control system as a whole – typically the supply of the transmission actuators (solenoid supply, transmission relay, supply switch in the module) or a circuit fault not assigned to a single component. No manufacturer document available to us describes it in detail; Ford's engine module list for 6.8 L E- and F-Series trucks stores it without the check engine light. If the solenoid supply is lost, transmissions usually fall back to a hydraulic limp gear. Individual solenoids have their own codes (P0750 ff); actuator supply is P0657 ff.
Possible causes
- Transmission actuator supply interrupted (fuse, relay, ground) high
- Harness or connector at transmission or module damaged, corroded or oil-soaked medium
- Transmission module output stage or supply switch faulty medium
- Low or fluctuating system voltage low
Symptoms
- Transmission limp mode with fixed gear
- Transmission warning; check engine light depending on the maker
- No or harsh shifts, further solenoid codes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0702
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.