OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0701

Transmission Control System Range/Performance

P0701 means the transmission control system works outside its expected range or its function is implausible – without a circuit fault. What exactly is checked is up to the manufacturer; no GM, Ford, Saab or bulletin document available to us describes the strategy. The only manufacturer evidence is Ford's engine module list for 6.8 L E- and F-Series trucks, where P0701 is stored without the check engine light. Typically the control cannot plausibly achieve the requested gear, pressure or torque, and the transmission goes into limp mode. Individual components have their own codes (P0705 ff range sensor, P0715 ff speed sensors, P0750 ff solenoids).

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 01

Possible causes

  • Transmission control faulty internally or software medium
  • Implausible input signals (speed or range sensor) without own circuit fault medium
  • Wrong fluid level or quality – hydraulics do not respond medium
  • Harness or connector with contact resistance low

Symptoms

  • Transmission warning (at Ford no check engine light)
  • Limp mode with fixed gear or missing gears
  • Harsh or irregular shifts

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0701

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication