OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0700

Transmission Control System (MIL Request)

P0700 is a notice code: the separate transmission control module has stored an emission-related fault of its own and asks the engine module to switch on the check engine light. The actual fault – a sensor, solenoid, ratio or speed sensor code – is stored in the transmission module and must be read with a tool that can address it; simple OBD readers often show only P0700. GM's engine module reads the request message from 3 s after start; Subaru-based systems (Saab 9-2X) light the MIL at once and clear it after three fault-free cycles. Ford's engine modules with integrated transmission control do not use P0700. Any limp mode comes from the transmission fault, not from P0700.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 00

Possible causes

  • Actual fault stored in the transmission module (sensor, solenoid, ratio, speed sensor) high
  • Wrong transmission fluid level or condition causing slip or ratio codes medium
  • Harness or connector at the transmission corroded or damaged medium
  • Low system voltage or weak battery low
  • Transmission module or software faulty low

Symptoms

  • Check engine light, possibly transmission warning
  • Depending on the transmission fault: limp mode, harsh or delayed shifts
  • Often no symptoms if the fault was intermittent
  • Simple OBD reader shows only P0700

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0700

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication