P06FF
Economy Mode Lamp Control Circuit
When the engine module switches a lamp through its own wire, it checks the output driver electrically like other lamp outputs: with the lamp off the line must carry supply voltage, with it on nearly 0 V – GM's MIL driver, for example, flags an open circuit at 200 kΩ or more. It cannot see whether the bulb lights, and on cars that send the lamp command over CAN such faults appear as U codes. P06FF concerns an economy indicator such as an ECO lamp that the engine module switches directly; the code reports a fault in its control circuit. It should not be confused with a body electrics 'economy mode' that saves battery energy. No manufacturer document available to us uses this code; the description follows CARB's output check and other lamp circuits. Driving is not affected.
Possible causes
- Wire or connector to the lamp open or shorted high
- Lamp or instrument cluster faulty medium
- Engine module low
Symptoms
- ECO indicator not working or permanently lit
- No effect on driving
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P06FF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.