OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06F9

Glow Plug Control Module 2 System Voltage

P06F9 means the supply voltage of glow plug control module 2 is out of range – the counterpart of P052F for module 1. For module 1, Ford's 2023 Power Stroke flags below 6.5 V, above 16.5 V or an open supply after about 1 s; GM's L5P checks the same under P163C (below 6.0 V with ignition above 9 V, or implausible against ignition voltage, 4 s). An FCA bulletin shows P052F together with the glow plug open codes, because without supply no current flows. No manufacturer document available to us uses a second glow module – Ford's and GM's V8 diesels drive all eight plugs from one; the code suits systems with one module per cylinder bank. The description follows module 1 (P052F). Check main feed, fuses and ground first.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / F9

Possible causes

  • Main feed to glow module 2 open or high-resistance (fuse, fusible link, B+ wire) high
  • Weak battery or discharged auxiliary battery medium
  • Module ground corroded medium
  • Charging voltage too high low

Symptoms

  • Check engine light, possibly glow plug/wait-to-start lamp
  • Hard cold start, long cranking in frost
  • Rough cold idle and white smoke, often one cylinder bank only
  • Usually no symptoms when warm

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P06F9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication