P06F4
Stop-Start Mode Lamp Control Circuit
When the engine module switches a lamp through its own wire, it checks the output driver electrically like other lamp outputs: with the lamp off the line must carry supply voltage, with it on nearly 0 V – GM's MIL driver, for example, flags an open circuit at 200 kΩ or more. It cannot see whether the bulb lights, and on cars that send the lamp command over CAN such faults appear as U codes. P06F4 concerns the indicator showing that stop-start is active or disabled; the code reports a fault in its control circuit. No manufacturer document available to us uses it; the description follows CARB's output check and other lamp circuits. Only the display is affected – the stop-start function itself has its own codes (P06E9, P06EF).
Possible causes
- Wire or connector to the indicator open or shorted high
- Indicator or instrument cluster faulty medium
- Engine module driver stage low
Symptoms
- Stop-start indicator not working or permanently lit
- Usually no check engine light
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P06F4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.