OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06EC

Fuel Injector Control Module Requested MIL Illumination

P06EC is a notice code like P0700: a separate fuel injector control module has stored an emission-related fault of its own and asks the engine module over CAN to switch on the check engine light. The actual fault is stored in that module and must be read there; simple OBD readers show only P06EC. GM uses it on the 2019 Corvette ZR1, whose LT5 engine adds port injection driven by its own module with its own crank and cam inputs; the code runs continuously from key on and is listed as type A without its own MIL – the lamp comes from the module's fault. Older separate injector modules (Ford 6.0 L Power Stroke, GM bi-fuel CNG trucks) report through P0611 or U codes instead. Any limp mode follows the module's fault.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / EC

Possible causes

  • Emission-related fault in the injector control module or its injectors/sensors (code stored there) high
  • Supply, ground or relay problem of the module medium
  • Internal module fault (memory, processor) medium
  • Software level of engine or injector module low

Symptoms

  • Check engine light on
  • Generic scanner shows only P06EC – details in the injector module
  • Depending on the fault, power loss, misfire or limp mode

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P06EC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication