OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06EB

NOx Sensor Processor Performance Bank 1 Sensor 2

A modern NOx sensor is a smart sensor: a ceramic sensing element with pump cells and heater plus its own control unit with a microcontroller, which regulates the pump currents, calculates NOx and oxygen and sends them to the engine module over CAN. P06EB means this control unit of sensor 2 (after the SCR catalyst) reports an internal fault – its self-tests of RAM and ROM or EEPROM checksums fail – so the electronics, not the sensing element, are at fault. No manufacturer document available to us uses this code: Ford's 2023 diesels run exactly these checks continuously, with a fault after 5 s, but report them as P229E; GM uses the P2200 family and U029D/U029E. The NOx value is then invalid, so SCR dosing runs on a model or stops, a warning appears and, depending on market, a countdown to a start lock.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / EB

Possible causes

  • Faulty electronics in the NOx sensor control unit high
  • Moisture or corrosion in control unit or connector (underbody location) medium
  • Under- or overvoltage or dips in the sensor supply medium
  • Unsuitable replacement sensor or software low

Symptoms

  • Check engine light or emissions warning
  • Message to check AdBlue/emission system, possibly countdown to start lock
  • Follow-up codes for SCR efficiency or NOx plausibility
  • Driveability usually unchanged

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P06EB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication