OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06E6

Sensor Power Supply C Circuit/Open

'Sensor power supply' is a separate J2012 family next to the 5 V sensor reference (P0697 ff): an additional supply from the module for sensors or drivers – in GM hybrids a 15 V supply for resolvers and inverter gate drivers, there as supplies A and B. Supply C is a third such circuit. P06E6 is the general or open-circuit code of supply C: the module measures the output of its supply regulator and finds the voltage missing. Low and high are P06E7/P06E8. Only Mitsubishi's 2022 Outlander lists P06E6 as a main code with sub-codes for low and high, called internal control module, without thresholds or the sensors fed. All sensors on the circuit then deliver invalid values, so several follow-up codes and limp mode are possible.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / E6

Possible causes

  • Open circuit or connector problem in the supply circuit high
  • Short in the supply wire or a supplied sensor medium
  • Supply regulator inside the module faulty medium
  • Vehicle under- or overvoltage low

Symptoms

  • Check engine light
  • Several sensor codes at the same time
  • Limp mode or reduced power possible
  • Possibly starting problems or rough running

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P06E6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication