P06E4
Control Module Wake-up Circuit Performance
Control modules are woken by a dedicated wake-up line or a network wake-up – at ignition on, when a charging cable is plugged in, or on a timer for engine-off diagnostics and battery management. P06E4 means this wake-up signal is implausible: the module wakes too late or not at all, stays awake, or the line state does not match the network status. In practice the code appears mainly on hybrids: FCA fixes it on the Pacifica plug-in hybrid and the Wrangler 4xe with module software, where it remained as a permanent code that blocked emission inspections; GM's hybrid integration module lists it as a fault bundle. No manufacturer publishes thresholds or timing.
Possible causes
- Module software (false setting, permanent code does not clear) high
- Wake-up line or connector open or shorted medium
- Weak 12 V battery, voltage dips at wake-up medium
- Engine or hybrid control module faulty low
Symptoms
- Check engine light
- Permanent code blocks emission inspection
- Possibly battery drain (module stays awake)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P06E4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.