OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06DB

Engine Oil Pressure Control Circuit Low

A switchable or variable oil pump saves fuel by lowering its output at part load; a solenoid valve sets the stage. GM and Ford design it so the pump runs at full output, i.e. high pressure, when the valve is unpowered – the safe default – and at the low stage when powered. P06DB means the control wire behind the valve is shorted to ground. With a low-side driver the valve is then powered all the time, so the pump stays at the low stage even at high load and speed. That endangers the engine, so GM flags a short below 0.5 Ω after just one trip, unlike open circuit and short to positive. GM checks the low-side driver at 11 V or more relay voltage over 40 of 50 samples (100 ms); Ford's smart driver reports output faults after 5 s with the battery at 11 V or more. A short to positive is P06DC, a pump stuck at low pressure without a circuit fault P06DE.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / DB

Possible causes

  • Control wire chafing against ground (engine block, oil pan) high
  • Control valve shorted internally medium
  • Oil or moisture in the connector medium
  • Engine module driver stage low

Symptoms

  • Check engine light at once (GM after one trip)
  • Low oil pressure at high engine speed, possibly oil pressure warning
  • Possibly reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P06DB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication