P06D7
Sensor Reference Voltage F Circuit Low
The engine module feeds sensors from several regulated 5 V reference circuits; a short at one sensor pulls the whole circuit down and all its sensors report at once – unplug them one by one to find the culprit. P06D7 means reference F is too low – typically a short to ground. No manufacturer document available to us names P06D7 itself; Ram's 6.7 L Cummins documents the neighbouring P06D3 for an engine module fault. Sensors on the circuit then read low; starting problems are possible if the rail pressure sensor is affected.
Possible causes
- Short in the wire or sensor of a connected sensor high
- Chafing or water in harness or connector medium
- A connected sensor faulty internally medium
- Module internal voltage regulator or components low
Symptoms
- Check engine light
- Several sensor codes at once
- Reduced power or limp mode
- Possibly starting problems
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P06D7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.