P06D6
Sensor Reference Voltage F Circuit/Open
The engine module feeds sensors from several regulated 5 V reference circuits; a short at one sensor pulls the whole circuit down and all its sensors report at once – unplug them one by one to find the culprit. P06D6 is the general code for circuit F. No manufacturer document available to us uses this code; the description follows the other reference circuits. GM uses general collective codes for circuits 1–5 (4.875–5.125 V, first trip); a sixth circuit is not listed in the GM tables available to us.
Possible causes
- Short in the wire or sensor of a connected sensor high
- Chafing or water in harness or connector medium
- A connected sensor faulty internally medium
- Module internal voltage regulator or components low
Symptoms
- Check engine light
- Several sensor codes at once
- Reduced power or limp mode
- Possibly starting problems
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P06D6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.