P06D2
Sensor Reference Voltage E Circuit/Open
The engine module feeds sensors from several regulated 5 V reference circuits; a short at one sensor pulls the whole circuit down and all its sensors report at once – unplug them one by one to find the culprit. P06D2 is the general code for circuit E. GM uses it as the collective code for its fifth 5 V reference: petrol engines 2015–2019 flag a reference outside 4.875–5.125 V in 19 of 39 samples with the lamp in the first trip, the 6.6 L Duramax LML/LGH 4.6 V or less for 0.1 s with two trips; GM includes it in its 'engine power limited' group. Which sensors are on circuit E is not listed. GM's hybrid control module uses P06D2 for a separate 12 V reference.
Possible causes
- Short in the wire or sensor of a connected sensor high
- Chafing or water in harness or connector medium
- A connected sensor faulty internally medium
- Module internal voltage regulator or components low
Symptoms
- Check engine light
- Several sensor codes at once
- Reduced power or limp mode
- Possibly starting problems
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P06D2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG03A Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG03B Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG03 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2014/14OBDG10 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG08 Engine Diagnostics.pdf