OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06CB

Cylinder 7 Glow Plug Incorrect

A glow plug has no identification; the control unit recognises its type only from its electrical behaviour – cold resistance at switch-on and how resistance rises during heating (R = U/I). A Beru patent describes how steel and ceramic plugs are told apart this way so the right heating profile is used and a wrong or mixed type is reported. A low-voltage plug on an 11 V control burns out, an 11 V plug on a low-voltage control glows too weakly. GM uses 'incorrect' for any resistance outside the window: the 2025 diesels check 0.22–2.00 Ω (15 of 25 samples, two trips), the L5P glow module a ramp-dependent window. P06CB reports this for cylinder 7. GM fixed false codes on 2020 HD and 1500 diesels by reprogramming.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / CB

Possible causes

  • Wrong glow plug type fitted in cylinder 7 (steel/ceramic, voltage rating) high
  • Plug resistance drifted (ageing, damage) medium
  • Glow module software or check during cranking (false report) medium
  • Contact resistance at the plug connector low

Symptoms

  • Check engine and glow plug lamp
  • Harder cold start or white smoke
  • Possibly plug burnt out (low-voltage plug on 11 V control)
  • Code after replacing plugs

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P06CB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication