P06CA
Cylinder 6 Glow Plug Incorrect
A glow plug has no identification; the control unit recognises its type only from its electrical behaviour – cold resistance at switch-on and how resistance rises during heating (R = U/I). A Beru patent describes how steel and ceramic plugs are told apart this way so the right heating profile is used and a wrong or mixed type is reported. A low-voltage plug on an 11 V control burns out, an 11 V plug on a low-voltage control glows too weakly. GM uses 'incorrect' for any resistance outside the window: the 2025 diesels check 0.22–2.00 Ω (15 of 25 samples, two trips), the L5P glow module a ramp-dependent window. P06CA reports this for cylinder 6. GM fixed false codes on 2020 HD and 1500 diesels by reprogramming.
Possible causes
- Wrong glow plug type fitted in cylinder 6 (steel/ceramic, voltage rating) high
- Plug resistance drifted (ageing, damage) medium
- Glow module software or check during cranking (false report) medium
- Contact resistance at the plug connector low
Symptoms
- Check engine and glow plug lamp
- Harder cold start or white smoke
- Possibly plug burnt out (low-voltage plug on 11 V control)
- Code after replacing plugs
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P06CA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG04 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2025/25OBDG04A.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2025/25OBDG04B.pdf
- static.nhtsa.gov/odi/tsbs/2020/MC-10176631-9999.pdf
- static.nhtsa.gov/odi/tsbs/2023/MC-10247191-0001.pdf
- patents.google.com/patent/US7431004