P06C1
Cylinder 9 Glow Plug Circuit Range/Performance
The glow module calculates each plug's resistance from voltage and current while glowing. 'Range/performance' means the circuit is electrically intact but the resistance or current lies outside the specified window – typically an aged, high-resistance or wrong plug or contact resistance at the connector. CARB requires a single plug outside specification to be detected from model year 2010. Ford's 2023 6.7 L/3.0 L Power Stroke runs this check during heating after the open and short checks and flags a circuit above 2 Ω after about 3 s. GM does not use this code family. No manufacturer document available to us uses this code for cylinders 9 and above; the description follows cylinders 1–8. P06C1 concerns the glow plug of cylinder 9 alone; the same plug's open circuit is P0679, its control circuit low and high P069A/P069B, and an incorrect plug fitted P06CD.
Possible causes
- Glow plug cylinder 9 aged or high-resistance high
- Contact resistance at plug connector or terminal nut medium
- Wrong plug type or a plug with a manufacturing fault medium
- Engine or glow module software (Ram 6.7 L from 2025) low
Symptoms
- Check engine and glow plug lamp
- Harder cold start in frost
- Rough running and white smoke after a cold start
- Often no symptom when warm
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P06C1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.