OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06B8

Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error

Non-volatile RAM keeps its content without power; among other things it stores the permanent fault codes CARB requires, which cannot be cleared with a scan tool. Ford sets P06B8 when the checksum of this permanent-code memory is wrong; a common companion is P068A (main relay dropped out too early, memory write incomplete). Ford's commercial and propane variants list it with or without the check engine light depending on the vehicle; Ford's 2023 diesel table misprints it as 'P068B'. GM and Saab do not use P06B8. Typical causes are interrupted shutdowns (battery disconnected, voltage dips), software faults and, rarely, a memory defect. After a software check, clearing and an ignition cycle with normal shutdown often resolve it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / B8

Possible causes

  • Interrupted shutdown (battery disconnected, voltage dip, main relay too early) high
  • Engine module software medium
  • Weak battery or poor ground medium
  • Memory defect in the module low

Symptoms

  • Check engine light (depending on the vehicle)
  • Often no driving symptoms
  • Possibly P068A as well

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P06B8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication