OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P06B6

Internal Control Module Knock/Combustion Vibration Sensor Processor 1 Performance

To detect an open knock sensor circuit, GM's engine modules feed a 20 kHz test signal into the sensor circuit and check whether it returns. P06B6 checks the internal test circuit or knock signal processor for sensor 1: it sets when the returned 20 kHz component lies between the open-circuit thresholds, so the module cannot decide 'connected' or 'open'. GM rates it type B (two trips), type A in some 2025 modules; Saab retards ignition timing as a reaction. GM bulletin 22-NA-229 calls for reprogramming only, not part replacement. Ford uses P06B6 for lost communication with its knock chip (more than 200 cylinder events). Knock sensor circuit codes are P0325–P0328.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / B6

Possible causes

  • Engine module software (GM bulletin) high
  • Internal knock processor or test circuit faulty medium
  • Knock sensor wiring with high resistance or intermittent contact medium
  • Knock sensor faulty low

Symptoms

  • Check engine light
  • Retarded ignition, less power and higher consumption
  • Often no other symptoms

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P06B6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication