P06AD
Control Module Internal Temperature Sensor B Circuit Low
Control modules can carry a second internal temperature sensor (B). In GM's 6T70/6T75 and related automatics, sensor A measures the circuit board (substrate) temperature, sensor B the 'power-up temperature' used as a reference and substitute; both sit inside the transmission module in the valve body, so repairs mean module or valve body. P06AD means the sensor B signal is at its low end: GM converts it and treats −59 °C or less for 60 s as a fault, lamp after two trips. Unlike most temperature sensors, low here corresponds to an implausibly cold reading. The module then uses a substitute value.
Possible causes
- Transmission module or valve body (internal sensor) faulty high
- Moisture or fluid in the module electronics medium
- Module supply or software low
Symptoms
- Warning or check engine light
- Changed shift quality (substitute value)
- Implausible module temperature in the scan tool
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P06AD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.