P06AC
Control Module Internal Temperature Sensor B Range/Performance
Control modules can carry a second internal temperature sensor (B). In GM's 6T70/6T75 and related automatics, sensor A measures the circuit board (substrate) temperature, sensor B the 'power-up temperature' used as a reference and substitute; both sit inside the transmission module in the valve body, so repairs mean module or valve body. P06AC is the plausibility check of sensor B: GM compares the power-up temperature with the substrate temperature (sensor A) and the transmission fluid temperature and sets the code after two trips if they disagree beyond tabulated limits. Check the fluid temperature sensor (P0711) as comparison partner first.
Possible causes
- Transmission module or valve body (internal sensor) faulty high
- Transmission fluid temperature sensor reads wrong medium
- Module supply or software low
Symptoms
- Warning or check engine light
- Changed shift quality (substitute value)
- Implausible module temperature in the scan tool
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P06AC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.