P06AA
Control Module Internal Temperature B Too High
Control modules can carry a second internal temperature sensor (B). In GM's 6T70/6T75 and related automatics, sensor A measures the circuit board (substrate) temperature, sensor B the 'power-up temperature' used as a reference and substitute; both sit inside the transmission module in the valve body, so repairs mean module or valve body. P06AA would report an overtemperature measured by sensor B – the counterpart of P0634 for sensor A (GM: 142 °C, Saab 9-4X: 146 °C with a limp mode in reverse and 5th gear). No manufacturer document available to us uses P06AA itself; GM reports overtemperature via sensor A. Check transmission fluid temperature, cooler and charging voltage first.
Possible causes
- Transmission fluid too hot (cooler, lines, level) high
- Charging system overvoltage medium
- Faulty internal sensor or module medium
- High sustained load (towing, heat) low
Symptoms
- Transmission limp mode possible
- Transmission warning
- Often transmission overtemperature as well
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P06AA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- saabwisonline.com/9-4x/2011/4-transmission/automatic-transmission-6t70-6t75/fault-diagnosis-diagnostic-trouble-codes/dtc-p0634
- saabwisonline.com/9-4x/2011/4-transmission/automatic-transmission-6t70-6t75/fault-diagnosis-diagnostic-trouble-codes/dtc-p06ac-p06ae