P06A7
Sensor Reference Voltage B Circuit Range/Performance
The engine module feeds sensors from several regulated 5 V reference circuits; a short at one sensor pulls the whole circuit down, so all its sensors report at once – unplug them one by one to find the culprit. P06A7 is the range/performance check of reference circuit B, without separate low and high. Ford reports reference B faults this way instead of P0652/P0653: petrol engines below 4.7 V or above 5.2 V for 0.5 s, the 2023 diesel below 4.7 V or above 5.3 V for 5 s, where supply 2 feeds the camshaft sensor. Camshaft sensor codes, starting problems or reduced power can follow. GM uses the collective code P0651 for circuit B.
Possible causes
- Short in the wire or sensor of a connected sensor high
- Chafing or water in harness or connector medium
- A connected sensor faulty internally medium
- Module internal voltage regulator low
Symptoms
- Check engine light
- Camshaft sensor codes as well
- Starting problems or reduced power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P06A7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.