P06A6
Sensor Reference Voltage A Circuit Range/Performance
The engine module feeds sensors from several regulated 5 V reference circuits; a short at one sensor pulls the whole circuit down, so all its sensors report at once – unplug them one by one to find the culprit. P06A6 is the range/performance check of reference circuit A: the voltage is outside a narrow window without being split into low and high. Ford uses it: its 2012 and 2020–23 petrol tables flag below 4.7 V or above 5.2 V for 0.5 s (Bosch modules), and the 2023 diesel below 4.7 V or above 5.3 V for 5 s, where supply 1 feeds the rail pressure and crankshaft sensors. In the Saab 9-4X the fuel pump control module uses it for its fuel pressure sensor supply. Expect fuel pressure or crankshaft codes and reduced power; Ford's low/high codes for circuit A are P0642/P0643.
Possible causes
- Short in the wire or sensor of a connected sensor high
- Chafing or water in harness or connector medium
- A connected sensor faulty internally medium
- Module internal voltage regulator low
Symptoms
- Check engine light
- Fuel pressure or crankshaft sensor codes as well
- Reduced power or starting problems
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P06A6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- newtonnet.co.uk/fiesta/fordobd2012.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- saabwisonline.com/9-4x/2011/2-engine/engine-management-and-fuel-system-v6/fault-diagnosis-diagnostic-trouble-codes/dtc-p0641-or-p06a6-fuel-pump-control-module