P069E
Fuel Pump Control Module Requested MIL Illumination
P069E is not a component fault but a notice in the engine module: the separate fuel pump control module has detected and stored an emission-related fault of its own and requests the check engine light – over serial data or, on older systems, a request line. GM uses it (2014–2019 tables) and lists P069E itself as 'type A, no MIL': the lamp is lit because of the fault in the pump module, not because of P069E. The actual cause must therefore be read from the fuel pump module's own memory – typically pump circuit, fuel pressure sensor, module overheating or supply. On GM diesels (2014) this module also controls the active grille shutters. Clear the code only after repairing the module's fault.
Possible causes
- Fault in the fuel pump circuit (pump, wiring, ground) stored in the pump module high
- Fuel pressure sensor or its wiring or 5 V reference medium
- Pump module faulty internally or overheated (corrosion, moisture) medium
- Insufficient supply or ground of the pump module low
Symptoms
- Check engine light on
- Possibly hard start, stumbling or lack of power from fuel supply problems
- Further codes stored in the fuel pump module
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P069E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.