OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0695

Fan 3 Control Circuit Low

The engine module switches the radiator fan relays (or the input of a PWM fan module) through output drivers and checks each control circuit electrically. GM sets a short to ground or voltage at 0.5 Ω or less after 50 of 63 samples, with the lamp after two trips; GM Europe's 2011 Saab 9-5 covers P0691–P0696 with relay assignments, the Saab 9-4X's PWM fan module reacts within 1 s. P0695 means the fan 3 control circuit is shorted to ground. Only the Saab page describes it in detail; GM lists it only in collective tables without thresholds.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 95

Possible causes

  • Control wire to fan relay or module shorted to ground (chafing) high
  • Water or corrosion in fan or relay connector high
  • Fan relay faulty (coil shorted or low-resistance) medium
  • Engine module driver faulty low

Symptoms

  • Check engine light (GM after two trips)
  • Fan runs constantly or not at all, depending on circuit design
  • Rising coolant temperature in traffic or with A/C on
  • A/C may be switched off to protect the engine

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0695

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication