P0694
Fan 2 Control Circuit High
The engine module switches the radiator fan relays (or the input of a PWM fan module) through output drivers and checks each control circuit electrically. GM sets a short to ground or voltage at 0.5 Ω or less after 50 of 63 samples, with the lamp after two trips; GM Europe's 2011 Saab 9-5 covers P0691–P0696 with relay assignments, the Saab 9-4X's PWM fan module reacts within 1 s. P0694 means the fan 2 control circuit is shorted to voltage; Ford's 2023 diesel checks its auxiliary fan relay within 0.5 s.
Possible causes
- Control wire shorted to battery or ignition voltage high
- Relay coil open or wrong relay fitted medium
- PWM fan module feeding voltage back onto the control line medium
- Engine module driver faulty low
Symptoms
- Check engine light (GM after two trips)
- Fan does not run
- Rising coolant temperature in traffic or with A/C on
- A/C may be switched off to protect the engine
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0694
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG03A Engine Diagnostics.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- saabwisonline.com/9-5-9650/2011/2-engine/cooling-system/fault-diagnosis-diagnostic-trouble-codes/dtc-p0480-p0482-or-p0691-p0696