OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P068A

ECM/PCM Power Relay De-Energized Performance Too Early

The engine module switches its main relay coil to ground (control circuit), reads the switched voltage back on a sense line and keeps the relay on briefly after ignition off to save learned values. P068A means the relay dropped out before the module released it. Ford explains it as the non-volatile memory write after ignition off not being completed before the module lost power; the 2023 diesel checks continuously within 0.5 s. GM Europe's 2.0 diesel checks with the engine running for an unexpected loss of relay voltage (no MIL). VW (2017–18 Jetta 1.4 T) and Stellantis (2026 Dodge Charger 3.0 twin turbo) fixed false reports by software updates. Real triggers include disconnecting the battery right after switch-off and loose contacts in the relay supply; learned values may be lost.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 8A

Possible causes

  • Engine module software (false report) high
  • Battery disconnected during or right after switch-off, or severe voltage dip medium
  • Open, high resistance or short to ground in the relay coil or contact supply medium
  • Relay faulty (drops out with vibration or heat) low

Symptoms

  • Check engine light (Ford, VW, Stellantis)
  • Often no noticeable symptoms
  • Lost learned values, rough idle after restart
  • With a contact fault: stalling or no start

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P068A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication