OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0677

Cylinder 7 Glow Plug Circuit/Open

Modern diesel glow systems switch each glow plug through its own power semiconductor (in a glow plug module or the engine module), so current and faults can be measured per plug. CARB requires glow plugs to be checked for current and voltage drop and, since model year 2010, a single faulty plug to be detected and named. P0677 means the load circuit of the cylinder 7 glow plug is open while glowing. Thresholds: GM engine-module drivers 200 kΩ or more (10 of 20 samples, two trips), GM's L5P glow module less than 4.0 A, Ford's 2023 6.7 L Power Stroke less than 1 A (cylinders 7 and 8 exist only on the V8). Older GM systems (LB7, LML) report open and short under this code. GM fixed false glow plug codes on 2017–20 heavy-duty diesels by reprogramming the glow module.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 77

Possible causes

  • Glow plug cylinder 7 burnt out (element open) high
  • Plug connector loose or corroded, terminal nut loose, wire broken medium
  • Glow module supply or ground (several cylinder codes at once) medium
  • Glow module or driver faulty, or software (GM bulletins) low

Symptoms

  • Check engine light (GM also glow plug lamp)
  • Harder cold start in low temperatures
  • Rough idle and white smoke after a cold start
  • Often no symptoms when warm

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0677

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication