P0669
Control Module Internal Temperature Sensor A Circuit High
Control modules measure their own circuit board temperature with an internal sensor to protect output stages (overtemperature is P0634) and, in GM transmission modules, as a substitute for fluid temperature. In GM's 6T70/6T75 and related automatics the sensor sits in the transmission module inside the valve body, with no external wiring – so the repair is practically always the module or valve body assembly. P0669 means the sensor signal is at the high voltage end (internal open or short to voltage): GM treats a converted value of 249 °C or more for 60 s as a fault, with the lamp after two trips and the power-up temperature as substitute. Unlike P0634, which reports a plausibly high real temperature (GM: 142 °C), P0669 reports a physically impossible value.
Possible causes
- Module faulty internally (sensor open) high
- Moisture or corrosion in the electronics medium
- Module supply or software low
Symptoms
- Warning lamp
- Changed shift quality (substitute value)
- Scan tool shows an implausibly high module temperature
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0669
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.