OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0668

Control Module Internal Temperature Sensor A Circuit Low

Control modules measure their own circuit board temperature with an internal sensor to protect output stages (overtemperature is P0634) and, in GM transmission modules, as a substitute for fluid temperature. In GM's 6T70/6T75 and related automatics the sensor sits in the transmission module inside the valve body, with no external wiring – so the repair is practically always the module or valve body assembly. P0668 means the sensor signal is at the low voltage end: GM converts it into a temperature and treats −249 °C or less – a physically impossible value – for 60 s as a fault, with the lamp after two trips and the power-up temperature as substitute. 'Low' refers to the voltage; depending on the sensor type that need not mean a low temperature.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 68

Possible causes

  • Module faulty internally (sensor or measuring circuit shorted) high
  • Moisture or fluid in the electronics of the valve body medium
  • Module supply problem low

Symptoms

  • Warning lamp
  • Changed shift quality (substitute value)
  • Scan tool shows an implausibly low module temperature

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0668

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication