P065F
Intake Manifold Tuning Valve Performance Bank 2
The intake manifold tuning valve switches the manifold length or plenum connection with engine speed (more torque low, more power high); it is not the runner or swirl flap (IMRC, P2004 ff). P065F is the function check of the bank 2 valve: it does not follow its command, detected via a position sensor or the intake pressure pulsation (GM patent). Bank 2 codes require a V-engine manifold with two separately switched valves; many V engines use a single central valve between the plenums, and no manufacturer document available to us uses this code, so the description follows bank 1. A stuck valve causes a torque gap in one rev band and can make the banks fill unevenly. Bank 2 circuit faults are P0663–P0665.
Possible causes
- Bank 2 valve or shaft sooted or stiff high
- Linkage between actuator and valve broken or unhooked medium
- Bank 2 actuator faulty internally medium
- Manifold or vacuum leak low
Symptoms
- Check engine light (depending on the maker)
- Torque gap in one rev band
- Noise from the intake manifold
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P065F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.