P065D
Reductant System Malfunction Lamp Control Circuit
The engine module switches this hard-wired output with its own driver and checks the circuit electrically (open, short to ground or voltage) – it cannot see whether the lamp lights; on CAN-based cars such faults appear as U codes. On SCR diesels a separate lamp or symbol warns of low DEF/AdBlue level, poor quality or system faults and announces speed or start restrictions (inducement). P065D reports a fault in the control circuit of this lamp. CARB requires inputs and outputs of the inducement strategy to be monitored on diesels from model years 2019–2021, and US federal rules define the inducement stages; Detroit Diesel, for example, shows the symbol below 1/8 tank and flashes it with a speed limit when empty. No manufacturer document available to us uses this code; the description follows CARB and the component. Without the lamp the driver may run into an inducement stage without warning; the code itself is not known to trigger one.
Possible causes
- Wire or connector between module and receiver open, corroded or shorted high
- Bulb/LED or instrument cluster faulty medium
- Lamp supply missing (fuse) medium
- Driver in the engine or SCR module faulty low
Symptoms
- AdBlue warning lamp does not light at ignition on, or stays on
- No early warning of low AdBlue (risk of speed limit or no-restart without notice)
- Check engine light possible (depending on the maker)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P065D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.