P065C
Generator A Mechanical Performance
Demand-controlled (smart) charging lets the module vary alternator voltage; the charging system is not an emission component, so these codes usually come without the check engine light. P065C points to the alternator's mechanical drive: the alternator does not deliver as commanded or its feedback does not match engine speed, typically because the belt slips. The only manufacturer document found – a table for a gateway with LIN alternator published via NHTSA – shows the battery lamp and disabled stop-start and names checking and adjusting the drive belt tension as the fix, to be checked before P065B. Thresholds are not published. Belt wear or oil contamination, a weak tensioner, a faulty overrunning pulley or a stiff alternator bearing are the obvious mechanical causes. Hybrid starter-generators use other codes.
Possible causes
- Drive belt slipping (tension, wear, oil) high
- Weak belt tensioner medium
- Alternator overrunning pulley faulty medium
- Alternator bearing or rotor stiff low
Symptoms
- Battery warning lamp
- Stop-start disabled
- Belt squeal
- Low battery voltage
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P065C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.