OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P064F

Unauthorized Software/Calibration Detected

P064F means the module has found that its software or calibration is not the version released by the manufacturer, or fails an authenticity check (signature, checksum, security keys). CARB requires manufacturers to protect calibrations against changes without special tools and to report calibration IDs and checksums. GM's 2025 engine modules set it when the embedded message authentication table for secured bus messages is invalid, with the lamp in the first trip; chassis modules also check missing key storage or wrong key-slot configuration. Chrysler fixed P064F on the 2017 Ram 3500–5500 chassis cab 6.7 L Cummins by reprogramming – so it is not only about tuning. Typical triggers are tuning software, an interrupted or wrong reflash, a module from another vehicle, or a module replaced without learning its security keys. Programming released software usually clears it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 4F

Possible causes

  • Unapproved or tuned software (chip tuning, programmer) high
  • Faulty or interrupted reflash, outdated software medium
  • Used or replaced module without learning the security keys, wrong configuration medium
  • Module faulty internally (key storage) low

Symptoms

  • Check engine light (GM in the first trip)
  • Possibly follow-up codes in other modules or communication problems
  • Driving often normal

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P064F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication