OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P064B

PTO Control Module

A power take-off (PTO) drives equipment on trucks and pick-ups – tipper, crane, hydraulic pump or winch – from the engine or transmission. A PTO control module, or the PTO function in the engine module, manages switching, working speed and release conditions; P064B reports a fault of this module or an implausible PTO request. The only manufacturer document found is a Chrysler case for Ram chassis cabs: with the PTO engaged the engine speed hunts and does not rise above about 1100 rpm, P064B sets together with the torque monitoring code P061B and the PTO switches off; the cause was software, so check upfitter installation and programming before replacing parts. CARB defines PTO units and allows monitors to pause while one is active. Thresholds and lamp status are not published; driving is usually normal.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 4B

Possible causes

  • Engine or PTO module software or calibration (implausible torque or speed request) high
  • PTO equipment installed or programmed incorrectly by the upfitter medium
  • Harness, connector or supply of the PTO module or switches medium
  • PTO control module faulty low

Symptoms

  • PTO switches off or cannot be engaged
  • Engine speed hunts with PTO active or stays below about 1100 rpm (Chrysler)
  • Warning lamp or stored code; driving usually normal

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P064B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication