P0649
Speed Control Lamp Control Circuit
The engine module switches this hard-wired output with its own driver and checks the circuit electrically (open, short to ground or voltage) – it cannot see whether the lamp lights; on CAN-based cars such faults appear as U codes. P0649 concerns the cruise control ('speed control') indicator where the engine module drives it by wire. No manufacturer document available to us uses this code; the description follows CARB and the component. CARB names cruise control as an example of a function outside the test cycles, and GM rates its cruise control diagnostics as emission neutral without the check engine light. The indicator then does not work or stays on; whether cruise control is also disabled depends on the maker. Cruise control inputs and switches have their own codes (P0564–P0581).
Possible causes
- Wire or connector between module and receiver open, corroded or shorted high
- Bulb/LED or instrument cluster faulty medium
- Instrument cluster faulty medium
- Output driver in the module faulty low
Symptoms
- Cruise control indicator not working or stays on
- Cruise control possibly disabled (depending on the maker)
- Code stored
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0649
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.