P063F
Auto Configuration Engine Coolant Temperature Input Not Present
Some modules configure themselves at start-up by detecting which inputs are present. P063F means the module expects a coolant temperature input but does not detect it during this self-configuration. It differs from the circuit codes P0117/P0118 (signal low/high) and the plausibility codes P0116, P0125 and P0128, which judge a present signal. No manufacturer document or patent available to us describes this check; the explanation is derived from the J2012 wording. CARB requires the coolant temperature sensor to be monitored for circuit, range and warm-up. Possible causes are an unplugged NTC sensor, an open wire or software for a different vehicle. Expect a substitute temperature, a constantly running fan, a dead temperature gauge and poorer cold starts.
Possible causes
- Coolant temperature sensor not connected, connector or wire open medium
- Wrong module software or variant medium
- Faulty sensor low
- Internal module fault low
Symptoms
- Check engine light
- Radiator fan runs constantly
- Temperature gauge not working
- Poor cold start, higher consumption
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P063F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.