OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0638

Throttle Actuator Control Range/Performance Bank 1

The electronic throttle motor positions the throttle plate; P0638 means the actuator does not follow its command on bank 1 (or the only throttle): target and actual angle from the two position sensors differ, or the motor needs too much duty cycle to hold the position. Subaru (also sold as Saab 9-2X) sets it at more than 3.5° deviation for 250 ms or over 95 % duty cycle for 2 s, lights the lamp at once and lets the spring set the plate to about 6° – raised idle, almost no power. GM's Saab 9-4X V6 uses more than 80 % duty cycle for over 1 s, lamp in the first trip. Mazda's CX-9 set it after frosty nights when condensation froze the throttle and fixed it with software that moves the plate after switch-off. Ford reports the same function as P2111/P2112.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 38

Possible causes

  • Throttle dirty, sooted or stiff high
  • Icing from condensation in frost medium
  • Throttle motor or gears worn medium
  • Resistance in the motor control wires medium
  • Module or software low

Symptoms

  • Check engine or electronic throttle light
  • Limp mode: much reduced power, raised idle
  • Delayed or jerky throttle response
  • Often after a cold start in frost

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0638

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication