P0636
Power Steering Control Circuit Low
P0635–P0637 concern the control or signal circuit between engine module and power steering – depending on the maker the drive of an electro-hydraulic pump or the steering load signal the engine module uses to raise idle. CARB requires power steering components to be monitored only if another diagnostic uses them, so these codes are rare and maker-specific. Mercedes-Benz stores P0635 in the electric steering module itself (no assist after start, software update); no engine module table available to us uses P0635–P0637. P0636 means the voltage in this circuit is too low – the wire is shorted to ground, supply voltage is low, or the driver sees a low state although it commanded 'on'. No manufacturer threshold is published.
Possible causes
- Signal or control wire shorted to ground (chafing) high
- Undervoltage from battery, alternator or ground medium
- Steering module or pump module faulty internally medium
- Engine module driver faulty low
Symptoms
- Power steering warning, heavy steering
- Check engine light (depending on the maker)
- Idle drops when steering
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0636
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.