OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0632

Odometer Not Programmed ECM/PCM

Engine modules increasingly keep their own copy of the odometer reading or take it over from the instrument cluster or body module; for model years 2019–2021 onward CARB requires mileage in the module's operating data records and explicitly mentions the case 'odometer is lost'. P0632 means the engine module holds no valid odometer value. It typically appears after the engine module was replaced and the mileage was neither transferred with the tool nor taken over from the cluster. GM notes for the 2019–20 Cadillac CT6-V that mileage is stored redundantly in engine module, body module and cluster, and that programming several of them at once can corrupt it – program one after the other. No manufacturer table available to us names P0632 itself. Driving is normal; service and operating counters may be implausible.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 32

Possible causes

  • Engine module replaced, mileage not transferred high
  • Several modules (engine, body, cluster) replaced or programmed at the same time medium
  • No communication to the cluster or body module during takeover low
  • Internal memory fault (EEPROM/NVM) low

Symptoms

  • Check engine light (depending on the maker)
  • Scan tool shows no or a different mileage in the engine module
  • Implausible service or oil change displays

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0632

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication