P0631
VIN Not Programmed or Incompatible TCM
P0631 is the transmission module counterpart of P0630: the transmission control module holds no VIN, an invalid one, or one that does not match the vehicle – usually compared with the VIN of the engine or body module. Typical is a replaced transmission module or mechatronic unit (on dual-clutch and automatic gearboxes with integrated control) that was not VIN-programmed, or a used part. Depending on the architecture the transmission module itself or the engine module sets the code. No manufacturer table or bulletin available to us names P0631; the description follows CARB's VIN rules and the documented P0630 procedure (Hyundai, Ford), where the VIN is distributed to all modules that need it and stored once. Shifting is usually normal, but adaptations or configuration may be blocked.
Possible causes
- Transmission module or mechatronic unit replaced, VIN not written high
- Used transmission module from another vehicle medium
- Interrupted transmission module programming medium
- CAN communication fault during the VIN comparison low
Symptoms
- Check engine light or transmission warning
- Scan tool shows no or a wrong VIN in the transmission module
- Transmission adaptation possibly impossible
- Driving often normal
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0631
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.