P062E
Fuel Injector Driver Circuit Performance Bank 2
Direct-injection injectors (petrol and common-rail diesel) need a high boost voltage generated in the module to open fast; the module then holds them with pulsed battery voltage. P062E is the bank 2 counterpart of P062D for V engines with separate driver circuits per bank. The only user found is Ford's 2023 diesel (6.7 L Power Stroke V8): the driver chip's internal logic reports a loss of the high-voltage supply and the code sets within 0.5 s; group supply faults of the injectors are P2150/P2151 and P2153/P2154. GM monitors the same boost voltage only under P062D. The injectors of bank 2 then open incorrectly – misfires on one side of the engine, rough idle, loss of power and possibly limp mode. Check wiring and connectors under the bank 2 valve cover and each injector for shorts before suspecting the engine module.
Possible causes
- Short in an injector wire or injector of bank 2 high
- Engine module or driver chip faulty internally medium
- Connector or harness under the bank 2 valve cover medium
- Undervoltage or poor ground low
Symptoms
- Check engine light on
- Misfires on one side of the engine
- Loss of power or limp mode
- Rough idle, starting problems
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P062E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.