OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P062C

Internal Control Module Vehicle Speed Performance

Electronic throttle systems run a second, independent calculation on the same processor (level 2, at Ford 'IPC – independent plausibility check') that recomputes driver demand, permitted and actual torque and their inputs, and compares them with the main software. Vehicle speed feeds torque monitoring through cruise control, speed limiter and gear-dependent limits. P062C means the module's internal cross-check of vehicle speed fails – main software and monitoring determine it separately, for example from transmission output or wheel speeds, and the values disagree. Ford sets it within 1 s with the wrench lamp; the check engine light came on only on generation 2 (2003–2007), since 2020 not at all. Cruise control and speed limiter are disabled, power may be limited. Ram 6.7 L Cummins (2019) fixed it by reprogramming. No threshold is published. Fix speed sensor codes P0500–P0503 first; a wrong tyre size or axle ratio in the module can also contribute.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 2C

Possible causes

  • Engine module software or calibration fault (update available) high
  • Disturbed vehicle or output speed signal (sensor, reluctor, ABS CAN data) medium
  • Wrong tyre size or axle ratio configured in the module low
  • Internal defect of the engine module low

Symptoms

  • Wrench lamp (Ford), check engine light only on older Ford
  • Cruise control not working
  • Possibly reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P062C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication