OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0626

Generator Field/F Terminal Circuit High

The alternator regulator is linked to the engine module by an L (turn-on) line, an F (field) line reporting field load as a duty cycle, or on newer cars a LIN bus. P0626 means the F feedback is too high – a duty cycle near 100 % when little or no field current is expected, typically a short to battery voltage. The Saab 9-4X sets it with ignition on and engine off above 65 % for 15 s, Saab's ME9 above 65 % for 3 s with the engine running, and raises the idle speed. Chrysler fixed P0626 on the 2019 Ram 3500–5500 chassis cab 6.7 L Cummins by reprogramming, as part of a check engine light bulletin; Ford's 6.8 L V10 reports it with or without the lamp. The former obdex title 'Performance' was wrong – all lists and manufacturers use 'High'.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 26

Possible causes

  • F line shorted to battery voltage (chafing), connector high
  • Regulator faulty (field permanently on, possibly overcharging) high
  • Engine module software (Ram 6.7 L 2019) medium
  • Module input faulty low

Symptoms

  • Battery or check engine lamp (Chrysler/Ford partly with MIL)
  • Raised idle
  • Possibly overvoltage or overcharging with a regulator fault
  • Often no driving symptoms

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0626

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication