P0624
Fuel Cap Lamp Control Circuit
Despite its neighbours, P0624 has nothing to do with the alternator: it is the control circuit of the 'check fuel cap' warning lamp of the evaporative system. Ford's evaporative monitor lights such a lamp when, after refuelling, the tank cannot be pulled into vacuum – a gross leak or missing cap (P0457) – and turns it off once the cap is secured; not every vehicle has this lamp. The module driving the lamp (engine or body module, depending on the vehicle) can monitor its output for open or short circuits. No manufacturer document available to us uses P0624 itself. The lamp is only a hint; the leak is reported with the check engine light as P0455/P0457, so P0624 itself is practically emission neutral under CARB. The lamp then never lights or stays on, and a loose cap is no longer indicated.
Possible causes
- Wire or connector to the warning lamp or instrument cluster high
- Bulb/LED or instrument cluster faulty medium
- Output driver in the engine or body module low
Symptoms
- Fuel cap lamp never lights or stays on
- A loose cap is no longer indicated
- No driving symptoms
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0624
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.