OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0622

Generator Field/F Terminal Circuit

The alternator regulator is linked to the engine module by an L (turn-on) line, an F (field) line reporting field load as a duty cycle, or on newer cars a LIN bus. P0622 checks the F feedback: its duty cycle equals the field on-time, from which the module calculates alternator torque and raises idle under load. Two plausibility tests: with ignition on and engine off the duty cycle must be near 0 % – a fault at 65 % or more; with the engine running (below 3000 rpm) it must be 5–99 % – a fault at 5 % or less. GM's 2023 and 2025 modules use 5 s each and, unusually, set the check engine light in the first trip; the Saab 9-4X uses 5 s and 15 s without it and only when P0621 is not set. Other systems split the same check into P0625 (low) and P0626 (high).

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 22

Possible causes

  • F line or alternator connector open or shorted high
  • Regulator or alternator faulty (field driver) high
  • Alternator not charging (belt, brushes), duty cycle implausible medium
  • Module or software low

Symptoms

  • Battery warning lamp on
  • Check engine light possible on GM from model year 2023
  • Idle fluctuates or drops when large loads switch on
  • Flat battery with a real charging fault

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0622

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication