OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P061B

Internal Control Module Torque Calculation Performance

Electronic throttle systems run a second, independent calculation on the same processor (level 2, at Ford 'IPC – independent plausibility check') that recomputes driver demand, permitted and actual torque and their inputs, and compares them with the main software. P061B means the torque calculation itself is inconsistent: main software and monitoring compute the torque differently. On Ford petrol engines it sets within 1 s with the check engine and wrench lamps and blocks the catalyst monitor. On Ford's 2023 diesel torque equals injected fuel, so P061B checks the injection control instead – energising times outside 10–850 ms, more than 127.2 µs between programmed and actual, or more than 5 mg difference in quantity correction (5 s). Software updates fixed it on Chrysler's 3.0 L EcoDiesel and the Ram 6.7 L Cummins; on the Ford Five Hundred it came with idle codes and a dirty throttle body.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number6 / 1B

Possible causes

  • Engine module software or calibration fault (update available) high
  • Dirty throttle or air path, idle adaptation at its limit (petrol) medium
  • Voltage dips, poor ground or supply at the module medium
  • Injector quantity deviation pushing the zero-fuel calibration out of range (diesel) low
  • Internal defect of the engine module low

Symptoms

  • Check engine light and wrench lamp
  • Reduced power or limp mode
  • Fluctuating idle (Ford petrol with dirty throttle)
  • Sometimes only the lamp

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P061B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication